Acidic Environment Induces Pyroptosis of NLRP3 Inflammatory Vesicle-Mediated Nucleus Pulposus Cells Through Up-Regulation of POSTN Expression

SUMMARY: Intervertebral disc degeneration (IVDD) is induced by nucleus pulposus (NP) dysfunction as a result of massive loss of NP cells. It has been reported that the acidic microenvironment of the intervertebral disc (IVD) can induce NP cell pyroptosis, and that up-regulation of periostin (POSTN) expression has a negative effect on NP cell survival. However, the relationship between the acidic environment, POSTN expression level and NP cell pyroptosis is unclear. Therefore, the aim of this study was to explore the relationship between acidic environment and POSTN expression level in NP cells, as well as the effect of POSTN in acidic environment on NP cell pyroptosis. NP cells were obtained from the lumbar vertebrae of Sprague Dawley (SD) male rats. These cells were divided into normal and acidic groups according to whether they were exposed to 6 mM lactic acid solution. And NP cells in the acidic group were additionally divided into three groups: (1) Blank group: no transfection; (2) NC group: cells transfected with empty vector plasmid; (3) sh-POSTN group: cells transfected with sh-POSTN plasmid to knock down the expression level of POSTN. Quantitative real-time PCR (qRT-PCR) and western blot was performed to assess the expression of POSTN at the mRNAand protein levels. CCK8 was used to evaluate cell survival. Western blot, in addition, was performed to examine acid-sensing ion channels (ASIC)-related proteins. And pyroptosis was detected by ELISA and western blot. The expression level of POSTN was significantly increased in NP cells in acidic environment. Knockdown of POSTN expression promoted the survival of NP cells in acidic environment and reduced the protein levels of ASIC3 and ASIC1a in NP cells. Moreover, knockdown of POSTN expression decreased the pyroptosis proportion of NP cells and the levels of pro-inflammatory cytokines interleukin (IL)-1β and IL-18. The levels of pyroptosis-related proteins NLRP3, ASC, cleaved-Caspase-1, and cleaved-GSDMD were also affected by the decreased POSTN expression. The extracellular acidic environment created by lactic acid solution activated NLRP3 inflammatory vesicle-induced caspase-1 to get involved in NP cell pyroptosis by up-regulating POSTN expression.

La degeneración del disco intervertebral (DDIV) es inducida por una disfunción del núcleo pulposo (NP) como resultado de una pérdida masiva de células NP. Se ha informado que el microambiente ácido del disco intervertebral (DIV) puede inducir la piroptosis de las células NP y que la regulación positiva de la expresión de periostina (POSTN) tiene un efecto negativo en la supervivencia de las células NP. Sin embargo, la relación entre el ambiente ácido, el nivel de expresión de POSTN y la piroptosis de las células NP es poco clara. Por lo tanto, el objetivo de este estudio fue explorar la relación entre el ambiente ácido y el nivel de expresión de POSTN en células NP, así como el efecto de POSTN en ambiente ácido sobre la piroptosis de las células NP. Las células NP se obtuvieron de las vertebras lumbares de ratas macho Sprague Dawley (SD). Estas células se dividieron en grupos normales y ácidos según se expusieron a una solución de ácido láctico 6 mM. Las células NP en el grupo ácido se dividieron adicionalmente en tres grupos: (1) Grupo en blanco: sin transfección; (2) grupo NC: células transfectadas con plásmido vector vacío; (3) grupo sh-POSTN: células transfectadas con plásmido sh-POSTN para reducir el nivel de expresión de POSTN. Se realizó una PCR cuantitativa en tiempo real (qRT-PCR) y una transferencia Western para evaluar la expresión de POSTN en los niveles de ARNm y proteína. Se utilizó CCK8 para evaluar la supervivencia celular. Además, se realizó una transferencia Western para examinar las proteínas relacionadas con los canales iónicos sensibles al ácido (ASIC). La piroptosis se detectó mediante ELISA y Western blot. El nivel de expresión de POSTN aumentó significativamente en células NP en ambiente ácido. La eliminación de la expresión de POSTN promovió la supervivencia de las células NP en un ambiente ácido y redujo los niveles de proteína de ASIC3 y ASIC1a en las células NP. Además, la eliminación de la expresión de POSTN disminuyó la proporción de piroptosis de las células NP y los niveles de citocinas proinflamatorias interleucina (IL) - 1β e IL-18. Los niveles de proteínas relacionadas con la piroptosis NLRP3, ASC, Caspasa-1 escindida y GSDMD escindida también se vieron afectados por la disminución de la expresión de POSTN. El ambiente ácido extracelular creado por la solución de ácido láctico activó la caspasa-1 inducida por vesículas inflamatorias NLRP3 para involucrarse en la piroptosis de las células NP mediante la regulación positiva de la expresión de POSTN.

Chemical pretreatment of Arundo donax L. for second-generation ethanol production

Background: Pretreatment of lignocellulosic biomass is essential for using it as a raw material for chemical and biofuel production. This study evaluates the effects of variables in the chemical pretreatment of the Arundo biomass on the glucose and xylose concentrations in the final enzymatic hydrolysate. Three pretreatments were tested: acid pretreatment, acid pretreatment followed by alkaline pretreatment, and alkaline pretreatment. Results: The amounts of glucose and xylose released by the enzymatic hydrolysis of the Arundo biomass obtained from acid pretreatment ranged from 6.2 to 19.1 g/L and 1.8 to 3.1 g/L, respectively. The addition of alkaline pretreatment led to a higher yield from the enzymatic hydrolysis, with the average glucose concentration 3.5 times that obtained after biomass hydrolysis with an acid pretreatment exclusively. The use of an alkaline pretreatment alone resulted in glucose and xylose concentrations similar to those obtained in the two-step pretreatment: acid pretreatment followed by alkaline pretreatment. There was no significant difference in 5-hydroxymethylfurfural, furfural, or acetic acid concentrations among the pretreatments. Conclusion: Alkaline pretreatment was essential for obtaining high concentrations of glucose and xylose. The application of an alkaline pretreatment alone resulted in high glucose and xylose concentrations. This result is very significant as it allows a cost reduction by eliminating one step.

Influence of Organic Acids from the Oral Biofilm on the Bond Strength of Self-Etch Adhesives to Dentin

Abstract: The aim of this study was to evaluate the microtensile bond strength of self-etch adhesive systems to dentin after storage in acids from oral biofilm. Three adhesive systems were used in the study: a two-step self-etch adhesive for use with a silorane-based resin composite (Filtek P90 adhesive system - P90), a two-step self-etch adhesive (Clearfil SE Bond - CSE) and a one-step self-etch adhesive (Adper Easy One - AEO). The bond strength of these products was evaluated by bonding resin composite (Filtek Z350 for CSE and AEO; and Filtek P90 for P90) to 90 bovine dentin tooth fragments, according to the manufacturer's instructions. After 24 h of water storage at 37 °C, the specimens were sectioned into beams (1 mm2) divided and stored in distilled water, lactic acid and propionic acid, for 7 and 30 days. After storage, the specimens were tested for microtensile bond strength. Data were analyzed by three-way ANOVA and Tukey´s test (α=0.05). CSE presented the highest microtensile bond strength after storage in distilled water for 7 and 30 days. The microtensile bond strength of all adhesive systems was lower after storage in lactic acid and propionic acid than after water storage. Significant difference was not found between storage times.

Resumo: O objetivo deste trabalho foi avaliar a resistência de união de sistemas adesivos autocondicionantes após estocagem em ácidos presentes no biofilme oral. Foram utilizados três sistemas adesivos: um autocondicionante de dois frascos indicado para uso com a resina composta à base de silorano (P90 System Adhesive- P90), um autocondicionante de dois frascos (Clearfil SE Bond - CSE) e um autocondicionante de frasco único (AdperEasyOne - AEO). Para avaliação da resistência de união à dentina, 90 fragmentos de dentes bovinos foram restaurados de acordo com as recomendações dos fabricantes. Após a confecção de blocos de resina composta (Filtek Z350 para os sistemas adesivos AEO e CSE; Filtek P90 para o sistema adesivo P90) e estocagem em água destilada por 24 h a 37 °C, os fragmentos foram seccionados para a obtenção de palitos (1 mm2) que foram divididos e estocados nos três diferentes meios de imersão (água destilada, ácido lático e ácido propiônico) por períodos de 7 dias e 30 dias (n=5). Em seguida, foi realizado o ensaio de resistência à microtração. Os dados foram submetidos à Análise de Variância (3 fatores) e ao Teste de Tukey (α=0,05). O sistema adesivo CSE apresentou maior resistência de união após imersão em água por 7 ou 30 dias. A resistência de união de todos os sistemas adesivos foi menor após imersão em ácido lático e propiônico do que após imersão em água. Não foi observada diferença significativa entre os tempos de imersão.

Evaluation of polymeric adsorbent resins for efficient detoxification of liquor generated during acid pretreatment of lignocellulosic biomass.

Production of fuel ethanol from lignocellulosic biomass conventionally includes biomass pretreatment, hydrolysis, and fermentation. The liquor generated during dilute acid pretreatment of biomass contains considerable quantities of pentose sugars as well as various degradation products of sugars and lignin, like furfural, hydroxymethyl furfural (HMF), organic acids, aldehydes and others, which are known to be inhibitory for microbial growth. This pentose rich liquor is a potent resource which can be used to produce alcohol or other value added metabolites by microbial fermentation. However, the presence of these inhibitory compounds is a major hindrance and their removal is essential for efficient utilization of this byproduct stream. In the present work, the polymeric adsorbent resins, XAD-4, XAD-7 and XAD-16 were evaluated for their ability to adsorb fermentation inhibitors like furfural and HMF from the acid pretreated liquor. These resins could remove 55-75% of furfural and 100% of HMF and more than 90% sugar remained un-adsorbed in the pretreated liquor. Desorption of furfural from stationary phase was evaluated by using ethanol and hot water. The results suggest that these polymeric resins may be used for detoxification of acid pretreatment liquor with selective removal of sugar degradation products without affecting the sugar content in the solution.

Flexural strength of fluorapatite-leucite and fuorapatite porcelains exposed to erosive agents in cyclic immersion

OBJECTIVE: The aim of this study was to evaluate the fexural strength of two porcelain materials (IPS d.SIGN and IPS e.max Ceram) exposed to erosive agents. MATERIAL AND METHODS: One hundred and twenty bar-shaped specimens were made from each of fuorapatite-leucite porcelain (IPS d.SIGN) and fuorapatite porcelain (IPS e.max Ceram) and divided into 8 groups of 15 specimens each. Six groups were alternately immersed in the following storage agents for 30 min: deionized water (control), citrate buffer solution, pineapple juice, green mango juice, cola soft drink and 4 percent acetic acid. Then, they were immersed for 5 min in deionized water at 37ºC. Seven cycles were completed, totalizing 245 min. A 7th group was continuously immersed in 4 percent acetic acid at 80ºC for 16 h. The final, 8th, group was stored dry at 37ºC for 245 min. Three-point bending tests were performed in a universal testing machine. The data were analyzed statistically by 2-way ANOVA, Tukey's HSD test and t-test at signifcance level of 0.05. RESULTS: The fexural strengths of all groups of each porcelain after exposure to erosive agents in cyclic immersion did not differ signifcantly (p>0.05). For both types of porcelain, dry storage at 37ºC yielded the highest fexural strength, though without signifcant difference from the other groups (p>0.05). The fexural strengths of all groups of fuorapatite porcelains were signifcantly higher (p<0.05) than those of the fuorapatite-leucite porcelains. CONCLUSIONS: This study demonstrated that the erosive agents evaluated did not affect the fexural strength of the tested dental porcelains.

Control of erosive tooth wear: possibilities and rationale

Dental erosion is a type of wear caused by non bacterial acids or chelation. There is evidence of a significant increase in the prevalence of dental wear in the deciduous and permanent teeth as a consequence of the frequent intake of acidic foods and drinks, or due to gastric acid which may reach the oral cavity following reflux or vomiting episodes. The presence of acids is a prerequisite for dental erosion, but the erosive wear is complex and depends on the interaction of biological, chemical and behavioral factors. Even though erosion may be defined or described as an isolated process, in clinical situations other wear phenomena are expected to occur concomitantly, such as abrasive wear (which occurs, e.g, due to tooth brushing or mastication). In order to control dental loss due to erosive wear it is crucial to take into account its multifactorial nature, which predisposes some individuals to the condition.

Surface degradation of composite resins by acidic medicines and ph-cycling

This study evaluated the effects of acidic medicines (Dimetapp® and Claritin®), under pH-cycling conditions, on the surface degradation of four composite resins (microhybrid: TPH, Concept, Opallis and Nanofilled: Supreme). Thirty disc-shaped specimens (Ø = 5.0 mm / thickness = 2.0 mm) of each composite were randomly assigned to 3 groups (n = 10): a control and two experimental groups, according to the acidic medicines evaluated. The specimens were finished and polished with aluminum oxide discs, and the surface roughness was measured by using a profilometer. After the specimens were submitted to a pH-cycling regimen and immersion in acidic medicines for 12 days, the surface roughness was measured again. Two specimens for each material and group were analyzed by scanning electron microscopy (SEM) before and after pH-cycling. Data were analyzed by the Student's-t test, ANOVA, Duncan's multiple range test and paired t-test (α=0.05). Significant increase in roughness was found only for TPH in the control group and TPH and Supreme immersed in Claritin® (p<0.05). SEM analyses showed that the 4 composite resins underwent erosion and surface degradation after being subjected to the experimental conditions. In conclusion, although the roughness was slightly affected, the pH-cycling and acidic medicines caused surface degradation of the composite resins evaluated. Titratable acidity seemed to play a more crucial role on surface degradation of composite resins than pH.

A study of effects of acid activated saw dust on the removal of different dissolved tannery dyes (acid dye) from aqueous solutions.

The effectiveness of acid activated sawdust in absorbing D-Brown EGP and Lurazol Brown PM dyes from aqueous solutions was studied as a function of agitation time and initial dye concentration. The experimental data were fitted to Langmuir and Freundlich isotherm and found that adsorption process follows both the isotherms. The values of Langmuir and Freundlich constants indicate favorable and beneficial adsorption. Saw dust is an excellent low cost adsorbent of colored organic anions and may have significant potential as a color removal from tannery wastewater.